Expert Answers about Lexus IS 250

Roof Rack & Kayak Carriers For 2 Kayaks On A 2014 Lexus IS 250
I recommend getting the Rhino-Rack Vortex Aero System for your 2014 Lexus IS 250. It'll come with the 46 inch bars # RRVA118B-2 the 2500 Series Legs # RRRLKVA and the custom fit kit # DK380. It's fairly simple to install so I've included a video to help! As far as kayak carriers go, I like the J-Style Carriers like this one from Rhino-Rack # S512-S512X. You can fit kayaks on top of your roof easily. This will be best to center it on your vehicle to make it just as easy to load from either...
view full answer...

Using Two E-Bikes with Kuat NV 2.0 Base 2-Bike Platform Rack On a Class I Trailer Hitch
The Kuat NV 2.0 Base 2-Bike Platform Rack part # BA12B weighs 49 lbs. The weight of this rack and the weight of your bikes cannot exceed the tongue weight capacity of the vehicle. For example, if the bikes weigh 57 lbs each then your total tongue weight is 163 lbs. The tongue weight capacity of class I hitch is 200 lbs so as long as the vehicle is not rated lower, you'll be good to go. Please note, the Kuat NV 2.0 Base 2-Bike Platform Rack is a wheel mount rack so it's not compatible...
view full answer...

What are the Best Trunk Mount Bike Racks for a 2008 Lexus IS 250
For your 2008 Lexus IS 250 the best option I would recommend is the Thule OutWay trunk bike rack # TH45JV. The OutWay is the easiest rack to install/remove due to having only 2 retractable cables it uses to attach rather than 6 straps. Since you mentioned it's a women's bike I would recommend a Thule bike adapter # TH982XT (Adapts women's, alternative, oversize and some children's bike frames to fit various bike racks). And secondly the Thule Gateway Pro # TH78VR. This is a good bike rack,...
view full answer...

Recommended Trailer Hitch for 2014 Lexus IS 250
I spoke with my contact at Curt and he said the Curt trailer hitch # C11389, which you reference, is a confirmed fit for your 2014 Lexus IS 250. The hitch will not interfere with the factory exhaust, however the exhaust must be temporarily lowered for installation. In order to know if the hitch will interfere with your aftermarket exhaust, I will need to know what kind of aftermarket exhaust you have. I have attached a photo of Curt trailer hitch # C11389 installed on a 2014 Lexus IS 250...
view full answer...

Does Rhino Rack Ski and Snowboard rack part # RR576 Fit Rhino Rack Crossbars
Yes, the Rhino Rack Ski and Snowboard rack part # RR576 will fit all of the Rhino Rack crossbar designs so it would work well for you.
view full answer...

Best Trunk Mount Bike Rack for a 2013 Lexus IS 250
As long as your 2013 Lexus IS 250 is not a convertible then the best trunk mount bike rack option is going to be the Thule OutWay # TH45JV for 2 bikes or # TH56BV for 3 bikes. I own an older version of this rack and it is by far the easiest rack to mount that I have used. It has only 2 rubber coated straps rather than 6 straps like other bike racks. Only 2 attachment points to worry about making it easy to install and remove. If you do have a convertible then the best rack is going to...
view full answer...

Affordable High Quality Trailer Hitch and Wiring for a 2006 Lexus IS 250 to Carry a KX65 Dirt Bike
It is possible but the only way to safely carry the bike around with your 2006 Lexus IS 250 is to tow it on a trailer. None of the hitch mounted carriers will work with a Class I trailer hitch such as # C11372. I recommend you put your son's bike on a trailer. In addition to the hitch you will also need the recommended ball mount # C45521 and a properly sized ball to match the coupler on the trailer. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. And for trailer wiring...
view full answer...

Trailer Hitch Recommendation For 2015 Lexus IS 250 Convertible
We do have an option for a trailer hitch on the 2015 Lexus IS 250 convertible. I recommend Class I Curt Trailer Hitch Receiver part # C11047. When you mention lightweight if you are referring to the actual weight of the hitch, the Curt hitch weighs about 19 lbs. If you are referring to the weight capacity of the hitch, it can handle 200 lbs of tongue weight. The Class I hitches are mostly used for bike racks on the Lexus so you would want to keep the weight of the bike rack and the bikes...
view full answer...

Recommended Trailer Hitch Receiver for 2015 Lexus IS 250 for a Bike Rack and Light Trailer
I recommend the Draw-Tite trailer hitch receiver, part # 24923, for your 2015 Lexus IS 250. It's confirmed to fit both the sedan or convertible models. The hitch is a Class I, 1-1/4 inch receiver so you need to make sure the bike rack you use fits the Class I. The bike rack I recommend is the very popular Thule T2 Pro XTR, part # TH23JV. The T2 is a platfrom rack that carries up to 2 bikes at 50 pounds each. it can be folded up out of the way when you're not using it as well as tilted...
view full answer...

Recommended Trailer Hitch And Bike Carrier For Recumbent Bike On 2006 Lexus IS 250
We do offer one trailer hitch that is designed to fit your Lexus. I recommend the Curt Trailer Hitch, part # C11372. This is a Class l hitch and it has a 1-1/4 inch receiver opening. All non-trailer loads like bike racks, cargo carriers and so forth should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt. The bike carrier I recommend for your Sun recumbent bike is the Hollywood Racks Sport Rider, part...
view full answer...

Roof Rack Recommendation for a 2015 Lexus IS 250
We do have roof rack options for your 2015 Lexus IS 250 but SportRack roof rack # SR1002 is not a fit. The most cost effective for the quality roof rack is from Rhino-Rack using the following parts: Crossbars # RRVA118B-2 Feet # RRRLKVA Fit kit # DK380 Another benefit of this roof rack is that it is custom fit whereas the SportRack is a semi-custom fit and would not fit as well as a true custom kit.
view full answer...

Parts Needed To Power Interior Lights On an Enclosed Cargo Trailer
It looks like you already have everything you need to complete this mission. The only thing left to do would be to drill a hole or find an existing wire path into your trailer from the battery box and run the wiring to your lights. The last thing you'll want to make sure you have is some silicone # 0160297 to seal the holes and keep water out.
view full answer...

Hitch and Bike Rack Recommendation for a 2011 Lexus IS 250
The only hitch we offer for your 2011 Lexus IS 250 Sedan is the Curt Hitch part # C11372 which is a Class I hitch with a 1-1/4 inch opening. There is no good way to use a 2 inch bike rack in a 1-1/4 inch hitch. You would have to use an adapter like part # HTAD which would reduce the capacity of the hitch by 50 percent. 2 inch hitches are usually only seen on vehicles with higher capacities like trucks and SUVs. I know you said you don't want to go with a different bike rack but that really...
view full answer...

Bike Rack Options for a 45 lb Electric Bike
I do have some bike rack options that will allow you to carry a 45 lb bike. Unfortunately the vast majority of hanging style bike racks (which tend to be lighter than platform style) cannot support the weight of a 45 lb bike. Saris has their Freedom # SA4412B 2 bike platform rack which is only 22.5 lbs and can support two 60 lb bikes. Since this is a platform style rack, I believe that it is a good lightweight alternative to the Beta. The only problem with this one that I foresee, yet...
view full answer...

New Trailer LED Tail Lights Do Not Light Up with Running lights on 2011 Lexus IS 250
It sounds like there could be a ground problem. A weak ground could cause this issue. Different vehicles also have different power capabilities so testing with another vehicle does not always indicate where the problem is. What you will want to do is test the vehicle without the trailer connected. You are going to need a meter to test the voltage on the trailer wiring harness on your Lexus. If you need a meter we have # PT89ZR. First, test the running light wire going into the converter...
view full answer...

Roof Rack for a 2014 Lexus IS 250 with a Sunroof
For your 2014 Lexus IS 250 I recommend a roof rack system with aero bars because it will be the most aerodynamic, produce less noise, and will look the best on your vehicle. Rhino-Rack system # RR96QR is a great option. This system has bars that do not overlap the feet so the system looks more like a factory roof rack. The only drawback is that there is less bar space to mount accessories so depending on how wide your cargo box is you may or may not be able to also fit a bike next to the...
view full answer...

Trailer Hitch Receiver for 2012 Lexus 250C to Carry a Bike Rack
The Curt # C11047 is the correct hitch for your 2012 Lexus 250C. Most mechanics are able to install a hitch receiver so you might check around local shops to find what they will charge. The hitch is a Class I so you'll need a bike rack to fit. The Thule Helium Pro # TH9042PRO will fit and there's no need to have any additional holes drilled because it includes locks to secure the rack to the hitch receiver. There's also a lock to secure the bike to the rack.
view full answer...

Best Way to Carry 4 Bikes on a 2012 Lexus IS250C Convertible
This particular instance has to do with the way that a Class I hitch, like the Curt Class I Round Tube Receiver, part # C11047, is structured and the way that the leverage applied by the weight of the bikes will affect a light duty hitch. Class I hitches are only intended for use to carry 2 bikes because putting weight further back on the shank of the bike rack will apply undue force to the hitch and the rack itself, causing the shank of the bike to possibly bend and fail because of the...
view full answer...

Can ThermaHeat Heater Pad be Insulated with Spray Foam
I spoke with my contact at ThermaHeat regarding the Heater Pad # 277-000163 that you referenced. He did state that they don't really recommend insulating the pad with foam like what you are describing, as this can potentially affect its function and may interfere with the surrounding wiring as well. The pads are designed to attach directly to the tank. I have attached a short video demonstration on the heater pad that you can also check out.
view full answer...

Replacement 2 inch Hitch Adapter for Yakima Ridgeback Bike Rack
What you are looking for is the 2 inch hitch adapter for the Ridgeback which for that you'd need the part # 8880612.
view full answer...